480 ± 10 g/m²
Catalogue fabric profile
Width140 cm
MATERIAL SPECIFICATIONS
The details behind
the touch.
Compare construction, durability and finish. Explore the technical values reported in Minsheng’s product catalogue, with each source kept in view.
01 / CATALOGUE · PAGE 17
Two reference profiles.
The profiles show different fabric weights without identifying a fabric code. Confirm the applicable profile with your sample request.
420 ± 10 g/m²
Catalogue fabric profile
Width140 cm
COMPOSITION / BOTH PROFILES
Surface, backing & bond.
- Nylon flock
- 32%
- Polyester backing
- 12%
- Cotton backing
- 7%
- Acrylic adhesive*
- 49%
| Property | Profile A | Profile B | Unit as printed | Referenced method |
|---|---|---|---|---|
| Fabric weight | 480 ± 10 | 420 ± 10 | g/m² | ISO 2286-2 |
| Width | 140 | 140 | cm | Not stated |
| Lengthwise breaking strength | ≥ 350 | ≥ 350 | N | ISO 13394-1* |
| Tear strength | ≥ 25 | ≥ 25 | N | ISO 13937-3 |
| Martindale abrasion | ≥ 100,000 | ≥ 100,000 | rub | ISO 12947-4 |
| Rubbing colourfastness | Dry ≥ 4; wet ≥ 3–4 | Dry ≥ 4; wet ≥ 3–4 | gs | ISO 105-X12 |
| Washing colourfastness | ≥ 4 | ≥ 4 | bw | ISO 105-C10 |
| Light colourfastness | ≥ 4 | ≥ 4 | bw | ISO 105-B02 |
| Water repellency | ≥ 4 | ≥ 4 | — | ISO 4920-1981 |
| Oil repellency | ≥ 7 | ≥ 7 | — | ISO 14419-2010 |
| Dirt repellency | ≥ 4 | ≥ 4 | — | AATCC 130-2000 |
* The breaking-strength method was originally printed as “ISO 13394-1”; confirm the method against the relevant report. Composition follows the manufacturer-supplied Chinese material.
“gs”, “bw” and “rub” are retained as printed. — means no unit is supplied. Values and method editions have not been updated or combined with other summaries.
A MATERIAL, MATCHED TO ITS USE
Specify with the sample.
Confirm with the report.
Use these figures to start a technical discussion. Confirm the fabric code, colour, test conditions and supporting report for your project.
02 / CATALOGUE · PAGE 18
WHP / WCMP
reported performance.
A separate summary of 20 test items. These results belong to the catalogue’s WHP / WCMP section and are not the specifications of the profiles above.
01Colour & care
| Test item | Referenced method | Reported result |
|---|---|---|
| Colourfastness to water | ISO 105-E01:2013 | ≥ 4–5 |
| Colourfastness to rubbing | ISO 105-X12:2001 | Dry ≥ 4–5; wet ≥ 4–5 |
| Colourfastness to light | ISO 105-B02:2014 | > 5 |
| Soil release / oily stain release | AATCC 130-2010 | 4–5 |
| Oil repellency | ISO 14419-2010 | 3 |
| Spray test / water repellency | ISO 4920:2012 | 2–3 |
02Strength & surface
| Test item | Referenced method | Reported result |
|---|---|---|
| Abrasion resistance | ISO 12947-2:1998 | 4–5† |
| Tensile strength | ISO 13934-1:2013 | > 350† |
| Tearing strength | ISO 13937-3:2000 | > 20† |
| Pilling resistance | ISO 12945-2:2000 | > 4 |
| Seam slippage | ISO 13936-2:2004 | < 5† |
03Chemical test results
| Test item | Referenced method | Reported result |
|---|---|---|
| Formaldehyde content | ISO 14184-1:2011 | < 50† |
| pH value | ISO 3071:2005 | > 4 |
| Azo colorants | EN 14362-1:2012(E) & EN 14362-3:2012(E) | < 30 mg/kg |
| Pentachlorophenol (PCP) | ISO 17070:2006 | N.D.‡ |
| Dimethylfumarate (catalogue: DMF) | US EPA 3550C:2007 & US EPA 8270D:2007 | N.D.‡ |
| Substances of very high concern (SVHC) | US EPA 3052:1996; US EPA 3050B:1996; US EPA 3060A:1996; US EPA 3550C-2007; US EPA 3540C:1996; ISO 17353:2004(E); BS EN 14582:2007 | N.D.‡ |
| Sum of NP, OP, NPEO & OPEO | Refer to US EPA 3550C:2007 & US EPA 8321B:2007 | < 50† |
04Flammability
| Test item | Referenced method | Reported result |
|---|---|---|
| Cigarette ignition test | BS 5852 part 1:1979 — Cigarette Test | Pass |
| Flame ignition test§ | BS 5852 part 1:1979 — Match Test | Pass |
† The source does not specify the unit or result scale for this entry. The abrasion value “4–5” is not presented as a rub count. Confirm the complete report before comparing results.
‡ “N.D.” is reproduced from the source. Detection limits and the tested substance list are not supplied here; this is not a claim that every fabric is free of these substances.
§ Page 4’s English text says “Match Test”; the Chinese text describes butane-flame ignition. Confirm the applicable ignition source and report.
Explore the complete technical data.
Fabric profiles, WHP / WCMP and Super Fabric specifications: pages 17-19 in the updated English catalogue.
03 / ADDITIONAL SOURCE
Super Fabric summary.
The Super Fabric summary is listed separately on catalogue page 19. The selected results below include water repellency > 4; WHP / WCMP on page 18 reports 2-3. See the catalogue for all 21 Super Fabric test items.
View six selected Super Fabric results
| Test item | Referenced method | Reported result |
|---|---|---|
| Colourfastness to water | ISO 105-E01:2013 | ≥ 4–5 |
| Colourfastness to rubbing | ISO 105-X12:2001 | Dry ≥ 4–5; wet ≥ 4–5 |
| Colourfastness to light | ISO 105-B02:2014 | > 5 |
| Soil release / staining | AATCC 130-2010 | 4–5 |
| Oil repellency | ISO 14419-2010 | 3 |
| Water repellency | ISO 4920:2012 | > 4 |
All figures on this page are transcribed from manufacturer-supplied material. They are not independently verified certificates or a guarantee for every colour, construction or production batch.
LET’S TALK MATERIALS